Patterned steel belongs to the plate class, but different from ordinary plates, the surface will have patterns. The material of checkered plate is the same as that of ordinary steel plate. There are three kinds of materials (aluminum alloy, stainless steel, ordinary steel, etc.). The pattern shape is different, and the adjusted weight per square meter is also different. Its pattern is in lentil shape, rhombic shape, round bean shape, and mixed shape. Lentil shape is the most common in the market. Mainly used in transportation, construction, decoration, equipment around the floor, machinery, shipbuilding and other fields!
Heating furnaces for medium and heavy plates are divided into continuous heating furnace, chamber heating furnace and soaking pit furnace according to their structures.
Some defects may appear on the surface of flat ingots, blooming billets or continuous casting billets, which are used as raw materials for the production of medium and thick steel plates
Advantages: the blooms are rolled by the bloomer with large ingots, so its structure is relatively dense, there is no as cast structure stress, and it can be heated at a higher heating speed than the ingots; Because the blooms have been compressed
(1) The content of harmful elements phosphorus and sulfur shall be as low as possible;
(2) The range of upper and lower limits of element content should be as small as possible, especially the content of carbon element;
ABOUT US
Plate Customization
